©GMTCUT SRL ( Global machines tools cutting )
Your machine tools center in ITALY / MIDDLE EAST
1.Crankcase transmission system:
three-cylinder crankshaft connecting rod structure
2.water inlet pressure is 0.4mpa
3.Max. water discharge is 3.5L/min
4.Max. diameter of orifice is 0.33mm
5.Max. operating pressure is 420MPa(60000 psi)
6.Continuous operating pressure is 46000-55000psi
7.Power requirement : 15KW, 20HP, 380-415V/50HZ,3 phrase
8Size: 1600*800*900mm
9.Ultrahigh Pressure Supercharging System(Supercharging cylinder, ceramic
piston rod, high pressure seal, low pressure seal, high pressure pipeline, one-way
valve, etc.)
10.Double-row water filtration system(5Micron, 1Micron, In series connection)
11. Automatic servo control system, output pressure control mode, intelligent
start-stop function.
12. Overpressure automatic shutdown and undervoltage automatic protection
function.
13. This pump will save 60%-70% electricity than intensifier pump
14.This pump working noise will be lower
15.This pump cutting speed will be 20% faster than intensifier pump at same
pressure
16. You needn t to use oil cooler or water cooler.
60000 Psi direct drive pump